MCrAlY

MCrAIY

Superior powders for superior coatings

Composed of nickel (Ni) or cobalt (Co) or a combination of both, MCrAlY powders are the foundation of gas turbine hot section thermal spray coatings. To create them, we use the industry’s most advanced Vacuum Induction Melting / Argon Gas Atomization (VIM/AGA) technology. The result is high-purity, low-oxide original equipment manufacturer (OEM)-approved powders that produce superior high-temperature oxidation- and corrosion-resistant coatings. See our Co- and Ni-based MCrAIY powders below.

Expand All Collapse All

Cobalt -

Powder Name & Composition	Chemistry & Size	Characteristics	Safety Data Sheet (SDS)
CO-242 Co MCrAlY (Atomized)	Proprietary	Product data available through OEM	CO-242 (128KB)
CO-242-3 Co MCrAlY (Atomized)	Proprietary	Product data available through OEM	CO-242-3 (128KB)
CO-249 Co MCrAlY (Atomized)	Proprietary	Product data available through OEM	CO-249 (128KB)
CO-249-2 Co MCrAlY (Atomized)	Proprietary	Product data available through OEM	CO-249-2 (128KB)
CO-249-4 Co MCrAlY (Atomized)	Proprietary	Product data available through OEM	CO-249-4 (128KB)
CO-249-6 Co MCrAlY (Atomized)	Proprietary	Product data available through OEM	CO-249-6 (128KB)
CO-249-8 Co MCrAlY (Atomized)	Proprietary	Product data available through OEM	CO-249-8 (128KB)
CO-260-1 Co MCrAlY (Atomized)	Proprietary	Product data available through OEM	CO-260-1 (137KB)
CO-260-12 Co MCrAlY (Atomized)	Proprietary	Product data available through OEM	CO-260-12 (137KB)
CO-301 Co MCrAlY (Atomized)	Proprietary	Product data available through OEM	CO-301 (131KB)
CO-301-3 Co MCrAlY (Atomized)	Proprietary	Product data available through OEM	CO-301-3 (131KB)
CO-127 CoNiCrAlY (Atomized)	Ni 32.0 Cr 21.0 Al 8.0 Y 0.5 Co balance -45 µm/+5 µm	Excellent corrosion and oxidation properties up to 1900°F / 1038°C Heat treating is required for optimum performance Typically used for either a Thermal Barrier Coating (TBC) bondcoat or an environmental protection coating GT-20	CO-127 (128KB)
CO-159 CoNiCrAlY (Atomized)	Ni 32.0 Cr 21.0 Al 8.0 Y 0.5 Co balance -75 µm/+16 µm	Excellent corrosion and oxidation properties up to 1900°F / 1038°C Heat treating required for optimum performance Typically used for either a TBC bondcoat or an environmental protection coating GT-20	CO-159 (128KB)
CO-210-1 CoNiCrAlY (Atomized)	Ni 32.0 Cr 21.0 Al 8.0 Y 0.5 Co balance -45 µm/+11 µm	Excellent corrosion and oxidation properties up to 1900°F / 1038°C Heat treating required for optimum performance Typically used for either a TBC bondcoat or an environmental protection coating GT-20	CO-210-1 (135KB)
CO-241 CoNiCrAlY (Atomized)	Ni 32.0 Cr 21.0 Al 8.0 Y 0.5 Co balance -45 µm	Excellent corrosion and oxidation properties up to 1900°F / 1038°C Heat treating required for optimum performance Typically used for either a TBC bondcoat or an environmental protection coating GT-20	CO-241 (128KB)
CO-210-24 / CO-241-3 CoNiCrAlY (Atomized)	Ni 32.0 Cr 21.0 Al 8.0 Y 0.5 Co balance -45 µm/+16 µm	Excellent corrosion and oxidation properties up to 1900°F / 1038°C Heat treating required for optimum performance Typically used for either a TBC bondcoat or an environmental protection coating GT-20	CO-210-24 (135KB)
CO-211 CoNiCrAlY (Atomized)	Ni 32.0 Cr 21.0 Al 8.0 Y 0.5 Co balance -90 µm/+38 µm	Excellent corrosion and oxidation properties up to 1900°F / 1038°C Heat treating required for optimum performance Typically used for either a TBC bondcoat or an environmental protection coating GT-20	CO-211 (127KB)
CO-211-1 CoNiCrAlY (Atomized)	Ni 32.0 Cr 21.0 Al 8.0 Y 0.5 Co balance -38 µm/+5 µm	Excellent corrosion and oxidation properties up to 1900°F / 1038°C Heat treating required for optimum performance Typically used for either a TBC bondcoat or an environmental protection coating GT-20	CO-211-1 (127KB)
CO-211-3 CoNiCrAlY (Atomized)	Ni 32.0 Cr 21.0 Al 8.0 Y 0.5 Co balance -150 µm/+63 µm	Excellent corrosion and oxidation properties up to 1900°F / 1038°C Heat treating required for optimum performance Typically used for either a TBC bondcoat or an environmental protection coating GT-20	CO-211-3 (1270KB)
CO-110 CoCrAlY (Atomized)	Cr 23.0 Al 13.0 Y 0.65 Co balance -45 µm/+5 µm	Atomized, CoCrAlY alloy	CO-110 (128KB)
CO-110-1 CoCrAlY (Atomized)	Cr 23.0 Al 13.0 Y 0.65 Co balance -106 µm/+31 µm	Atomized, CoCrAlY alloy	CO-110-1 (128 KB)

^Back to Top

Nickel -

Powder Name & Composition	Chemistry & Size	Characteristics	Safety Data Sheet (SDS)
NI-130 / NI-191 Ni MCrAlY (Atomized)	Co 22.0 Cr 17.0 Ai 12.5 Y 0.55 Ni balance -45 µm	High-temperature operation conditions Oxidation and hot corrosion resistance	NI-130 / NI-191 (134 KB)
NI-191-4 Ni MCrAlY (Atomized)	Co 23.0 Cr 17.0 Ai 12.5 Y 0.55 Ni balance -45 µm/+16 µm	High-temperature operation conditions Oxidation and hot corrosion resistance	NI-191-4 (134 KB)
NI-171 Ni MCrAlY (Atomized)	Co 23.0 Cr 17.0 Ai 12.5 Y 0.55 Ni balance -75 µm/+45 µm	High-temperature operation conditions Oxidation and hot corrosion resistance	NI-171 (133 KB)
NI-171-2 Ni MCrAlY (Atomized)	Co 23.0 Cr 17.0 Ai 12.5 Y 0.55 Ni balance -45 µm/+22 µm	High-temperature operation conditions Oxidation and hot corrosion resistance	NI-171-2 (133 KB)
NI-192 Ni MCrAlY (Atomized)	Co 22.0 Cr 17.0 Al 12.5 Si 0.4 Hf 0.25 Y 0.06 Ni balance -45 µm/+5 µm	Similar to the NI-130 / NI-191 alloy with addition of Hf and Si High-temperature operation conditions Oxidation and hot corrosion resistance	NI-192 (137KB)
NI-192-5 Ni MCrAlY (Atomized)	Co 22.0 Cr 17.0 Al 12.5 Si 0.4 Hf 0.25 Y 0.06 Ni balance -75 µm/+45 µm	Similar to the NI-130 / NI-191 alloy with addition of Hf and Si High-temperature operation conditions Oxidation and hot corrosion resistance	NI-192-5 (137KB)
NI-192-8 Ni MCrAlY (Atomized)	Co 22.0 Cr 17.0 Al 12.5 Si 0.4 Hf 0.25 Y 0.06 Ni balance -45 µm/+16 µm	Similar to the NI-130 / NI-191 alloy with addition of Hf and Si High-temperature operation conditions Oxidation and hot corrosion resistance	NI-192-8 (137KB)
NI-192-16 Ni MCrAlY (Atomized)	Co 22.0 Cr 17.0 Al 12.5 Si 0.4 Hf 0.25 Y 0.06 Ni balance -45 µm/+16 µm	Similar to the NI-130 / NI-191 alloy with addition of Hf and Si High temperature operation conditions Oxidation and hot corrosion resistance	NI-192-16 (137KB)
NI-535 Ni MCrAlY (Atomized)	Proprietary	Product data available through OEM
NI-535-2 Ni MCrAlY (Atomized)	Proprietary	Product data available through OEM	NI-535-2 (137KB)
NI-535-3 Ni MCrAlY (Atomized)	Proprietary	Product data available through OEM	NI-535-3 (137KB)
NI-535-4 Ni MCrAlY (Atomized)	Proprietary	Product data available through OEM	NI-535-4 (137KB)
NI-548-1 Ni MCrAlY (Atomized)	Proprietary	Product data available through OEM	NI-548-1 (138KB)
NI-548-4 Ni MCrAlY (Atomized)	Proprietary	Product data available through OEM	NI-548-4 (138KB)
NI-832 Ni MCrAlY (Atomized)	Proprietary	Product data available through OEM	NI-832 (138KB)
NI-832-2 Ni MCrAlY (Atomized)	Proprietary	Product data available through OEM	NI-832-2 (138KB)
NI-937 / NI-666 Ni MCrAlY (Atomized)	Proprietary	Product data available through OEM	NI-937 / NI-666 (133KB)
NI-937-2 Ni MCrAlY (Atomized)	Proprietary	Product data available through OEM	NI-937-2 / NI-666 (133KB)
NI-937-4 / NI-666-4 Ni MCrAlY (Atomized)	Proprietary	Product data available through OEM	NI-937-4 / NI-666 (133KB)
NI-944-1 Ni MCrAlY (Atomized)	Proprietary	Product data available through OEM	NI-944-1 (133KB)
NI-944-2 Ni MCrAlY (Atomized)	Proprietary	Product data available through OEM	NI-944-2 (133KB)
NI-944-3 Ni MCrAlY (Atomized)	Proprietary	Product data available through OEM	NI-944-3 (133KB)
NI-164 / NI-211 Ni-22Cr-10Al-1Y (Atomized)	Cr 22.0 Al 10.0 Y 1.0 Ni balance -106 µm/+45 µm	Good diffusional stability and oxidation properties Useful up to 1800°F / 982°C Typically used for a TBC bondcoat	NI-164 / NI-211 (133KB)
NI-211-2 Ni-22Cr-10Al-1Y (Atomized)	Cr 22.0 Al 10.0 Y 1.0 Ni balance -90 µm/+45 µm	Good diffusional stability and oxidation properties Useful up to 1800°F / 982°C Typically used for a TBC bondcoat	NI-211-2 (133KB)
NI-211-4 Ni-22Cr-10Al-1Y (Atomized)	Cr 22.0 Al 10.0 Y 1.0 Ni balance -63 µm/+22 µm	Good diffusional stability and oxidation properties Useful up to 1800°F / 982°C Typically used for a TBC bondcoat	NI-211-4 (133KB)
NI-211-7 Ni-22Cr-10Al-1Y (Atomized)	Cr 22.0 Al 10.0 Y 1.0 Ni balance -125 µm/+53 µm	Good diffusional stability and oxidation properties Useful up to 1800°F / 982°C Typically used for a TBC bondcoat	NI-211-7 (133KB)
NI-211-17 Ni-22Cr-10Al-1Y (Atomized)	Cr 22.0 Al 10.0 Y 1.0 Ni balance -180 µm/+22 µm	Good diffusional stability and oxidation properties Useful up to 1800°F / 982°C Typically used for a TBC bondcoat	NI-211-17 (133KB)
NI-164-2 Ni-22Cr-10Al-1Y (Atomized)	Cr 22.0 Al 10.0 Y 1.0 Ni balance -75 µm/+45 µm	Good diffusional stability and oxidation properties Useful up to 1800°F / 982°C Typically used for a TBC bondcoat	NI-164-2 (133KB)
NI-343 Ni-22Cr-10Al-1Y (Atomized)	Cr 22.0 Al 10.0 Y 1.0 Ni balance -45 µm/+11 µm	Good diffusional stability and oxidation properties Useful up to 1800°F / 982°C Typically used for a TBC bondcoat	NI-343 (132KB)
NI-246-3 Ni-31Cr-11Al-0.1Y (Atomized)	Cr 31.0 Al 11.25 Y 0.65 Ni balance -45 µm/+5 µm	Good diffusional stability and oxidation properties Useful up to 1800°F / 982°C Typically used for a TBC bondcoat	NI-246-3 (132KB)
NI-246-4 Ni-31Cr-11Al-0.1Y (Atomized)	Cr 31.0 Al 11.25 Y 0.65 Ni balance -90 µm/+38 µm	Good diffusional stability and oxidation properties Useful up to 1800°F / 982°C Typically used for a TBC bondcoat	NI-246-4 (132KB)

^Back to Top

Solving Challenges

Coatings

Application Processes

Manufactured Components

Supplemental Services

Materials

Coating Equipment

Quality & Continuous Improvement

Research & Application Development

Customer Success Stories

Vision & Values

History

Reports and Filings

Careers

MCrAlY

MCrAIY

Superior powders for superior coatings

Cobalt -

Nickel -

Contact Our Experts