Carbide

Carbide

Ultimate wear protection

Resisting wear is one of the greatest challenges for moving components. To help fight high- and low-temperature wear, we offer a complete line of spray dried, cast and sintered carbide powder solutions. See our APT, chromium carbide and tungsten carbide powder formulas below.  

APT -

Powder Name & Composition

Chemistry & Size

Characteristics

Safety Data Sheet (SDS)

CRC-410

CrC-30NiCr

(Activated)

Ni 8.0

C 4.0

Cr balance

-53 µm/+16 µm

  •  Atomized, fully alloyed CrC-NiCr powder

  • Improved DE and stress properties over traditional blended CrC-NiCr

  • Excellent for high-temperature cavitation, abrasion and sliding wear

  • Good hot gas and corrosion resistance

  • Useful up to 1600°F / 871°C

CRC-410 (132KB)

CRC-410-1

CrC-30NiCr

(Activated)

Ni 8.0

C 4.0

Cr balance

-45 µm/+11 µm

  • Atomized, fully alloyed CrC-NiCr powder

  • Improved DE and stress properties over traditional blended CrC-NiCr

  • Excellent for high-temperature cavitation, abrasion and sliding wear

  • Good hot gas and corrosion resistance

  • Useful up to 1600°F / 871°C

CRC-410-1 (132KB)

CRC-425

CrC-40NiCr

(Activated)

Ni 21.5

C 3.4

Cr balance

-53 µm/+16 µm

  • Atomized CrC-Ni-Cr powder similar to CRC-410

  • Improved ductility and better toughness

  • Slightly lower hardness

CRC-425 (132KB)

W-121

WC-36Cr-20Co

(Activated)

Cr 34.0

Co 20.0

C 4.0

W balance

-45 µm/+16 µm

  • Atomized WC-CoCr powder

  • Excellent DE (55-65%), flow -and spray-ability

  • Candidate for hard chrome replacement

  • Good sliding wear and mating properties

W-121 (133KB)

W-121-1

WC-36Cr-20Co

(Activated)

Cr 34.0

Co 20.0

C 4.0

W balance

-53 µm/+22 µm

  • Atomized WC-CoCr powder

  • Excellent DE (55-65%), flow- and spray-ability

  • Candidate for hard chrome replacement

  • Good sliding wear and mating properties

W-121-1 (133KB)

W-124

WC-48Cr-12Co

(Activated)

Cr 48.0

Co 12.0

C 4.0

W balance

-45 µm/+16 µm

  • Atomized WC-CoCr powder

  • Designed as a superior alternative to traditional WC alloys

  • Good toughness and corrosion resistance

  • Excellent DE (55-65%), flow- and spray-ability

  • Superior wear resistant properties

  • Candidate for hard chrome replacement

W-124 (133KB)

W-129

WC-45Cr-18Ni

(Activated)

Cr 43.5

Ni 18.0

C 3.5

W balance

-45 µm/+16 µm

  •  Atomized WC NiCr powder

  • Excellent DE (55-65%), flow and spray-ability

  • Candidate for hard chrome replacement

  • Good sliding wear and mating properties

W-129 (134KB)

Chromium Carbide -

Powder Name & Composition

Chemistry & Size

Characteristics

Safety Data Sheet (SDS)

CRC-105

Cr3C2

(Sintered)

Cr3C2

99.0 min

-45 µm

  • Usually blended with a metal for spraying

  • Hard and wear resistant

  • Useful up to 1600°F / 871°C

CRC-105 (121KB)

CRC-107

Cr3C2

(Sintered)

Cr3C2

99.0 min

-90 µm/+45 µm

  • Usually blended with a metal for spraying

  • Hard and wear resistant

  • Useful up to 1600°F / 871°C

CRC-107 (121KB)

CRC-106

Cr3C2-25NiCr

(Blended)

Ni 25.0

Cr3C2 balance

-45 µm/+5 µm

  • Excellent for high-temperature cavitation, abrasion and sliding wear

  • Good hot gas and corrosion resistance

  • Hard and wear resistant

  • Useful up to 1600°F / 871°C

CRC-106 (132KB)

CRC-108

Cr3C2-25NiCr

(Blended)

Ni 25.0

Cr3Cbalance

-90 µm/+11 µm

  • Excellent for high-temperature cavitation, abrasion and sliding wear

  • Good hot gas and corrosion resistance

  • Hard and wear resistant

  • Useful up to 1600°F / 871°C

CRC-108 (39KB)

CRC-174

Cr3C2-25NiCr

(Blended)

Ni 25.0

Cr3C2 balance

  • Excellent for high-temperature cavitation, abrasion and sliding wear

  • Good hot gas and corrosion resistance

  • Hard and wear resistant

  • Useful up to 1600°F / 871°C

CRC-174 (117KB)

 

CRC-300 / 1375VF

Cr3C2-25NiCr

(Agglomerated & Sintered)

Ni 25.0

Cr3C2 balance

-45 µm/+11 µm

  • Excellent for high-temperature cavitation, abrasion and sliding wear

  • Good hot gas and corrosion resistance

  • Very dense and hard coatings

  • Useful up to 1600°F / 871°C

CRC-300 / 1375VF (134KB)

CRC-300-1 / 1375VM

Cr3C2-25NiCr

(Agglomerated & Sintered)

Ni 25.0

Cr3C2 balance 

-45 µm/+16 µm

  • Excellent for high-temperature cavitation, abrasion and sliding wear

  • Good hot gas and corrosion resistance

  • Very dense and hard coatings

  • Useful up to 1600°F / 871°C

CRC-300-1 / 1375VM (134KB)

Tungsten Carbide -

Powder Name & Composition

Chemistry & Size

Characteristics

Safety Data Sheet (SDS)

WC-104

WC-12Co

(Cast)

Co 12.0

C 3.9

W balance

-125 µm/+45 µm

  • Excellent low-temperature wear properties

  • Dense, hard coating with marginal oxidation and corrosion resistance

  • Useful up to 900°F / 482°C

WC-104 (126KB)

WC-106

WC-12Co

(Cast)

Co 12.0

C 3.9

W balance

-45 µm/+5 µm

  • Excellent low-temperature wear properties

  • Dense, hard coating with marginal oxidation and corrosion resistance

  • Useful up to 900°F / 482°C

WC-106 (132KB)

 WC-819

WC-10Co

(Agglomerated & Sintered)

Co 10.0

Cr 5.3

C 4.0

W balance

-45 µm/+16 µm

  •  Lower-cost alternative to 1350VM

  • Densified structure with fine carbide dispersion promotes finer microstructure, better DE and denser, smoother coatings

  • Useful up to 900°F/482°C

WC-819 (128KB)

WC-114

WC-12Co

(Sintered & Crushed)

Co 12.0

C 5.4

W balance

-45 µm

  • Excellent low-temperature wear properties

  • Dense, hard coating with marginal oxidation and corrosion resistance

  • Useful up to 900°F / 482°C

WC-114 (126KB)

WC-489-1

WC-12Co

(Sintered & Crushed)

Co 12.0

C 5.4

W balance

-45 µm/+16 µm

  • Excellent low-temperature wear properties

  • Dense, hard coating with marginal oxidation and corrosion resistance

  • Useful up to 900°F / 482°C

WC-489-1 (129KB)

WC-726 / 1320Q

WC-11Co

(Agglomerated & Sintered)

Co 11.0

C 4.0

W balance

-45 µm/+5 µm

  • Excellent low-temperature wear properties

  • Dense, hard coating with marginal oxidation and corrosion resistance

  • Useful up to 900°F / 482°C

WC-726  / 1320 (127KB)

 WC-793

WC-11Co

(Agglomerated & Sintered)

Co 11.0

C 4.0

W balance

-45 µm/+16 µm

  • Excellent low-temperature wear properties

  • Dense, hard coating with marginal oxidation and corrosion resistance

  • Useful up to 900°F / 482°C

 WC-793 (126KB)

WC-727 / 1342VF

WC-12Co

(Agglomerated & Sintered)

Co 12.0

C 5.5

W balance

-38 µm/+11 µm

  • Similar properties as other WC-12Co

  • Densified structure with fine carbide dispersion promotes finer microstructure, better DE and denser, smoother coatings

  • Excellent flowability

  • Useful up to 900° F / 482° C

WC-727 / 1342VF (142KB)

WC-727-1 / 1342VM

WC-12Co

(Agglomerated & Sintered)

Co 12.0

C 5.5

W balance

-45 µm/+16 µm

  • Similar properties as other WC-12Co

  •  Densified structure with fine carbide dispersion promotes finer microstructure, better DE and denser, smoother coatings

  • Excellent flowability

WC-727-1 / 1342VM (142KB)

WC-727-5

WC-12Co

(Agglomerated & Sintered)

Co 12.0

C 5.5

W balance

-31 µm/+11 µm

  • Similar properties as other WC-12Co

  • Densified structure with fine carbide dispersion promotes finer microstructure, better DE and denser, smoother coatings

  • Excellent flowability

  • Useful up to 900°F / 482°C

WC-727 / 1342  (142KB)

WC-727-6

WC-12Co

(Agglomerated & Sintered)

Co 12.0

C 5.4

W Rem

-38 µm/+5 µm

  • Similar properties as other WC-12Co

  • Densified structure with fine carbide dispersion promotes finer microstructure, better DE and denser, smoother coatings

  • Excellent flowability

  • Useful up to 900° F / 482° C

WC-727-6  (142KB)

WC-729 / 1343VF

WC-17Co

(Agglomerated & Sintered)

Co 17.0

C 5.0

W balance

-38 µm/+11 µm

  • Higher Co levels for better toughness, impact strength and ductility

  • Densified structure promotes superior coating density and powder flow

  • Useful up to 900° F / 482° C

WC-729 / 1343VF  (127KB)

WC-729-1/1343VM

WC-17Co

(Agglomerated & Sintered)

Co 17.0

C 5.0

W balance

-45 µm/+16 µm

  • Higher Co levels for better toughness, impact strength and ductility

  • Densified structure promotes superior coating density and powder flow

  • Useful up to 900° F / 482° C

WC-729-1 / 1343VM  (127KB)

WC-729-5

WC-17Co

(Agglomerated & Sintered)

Co 17.0

C 5.0

W balance

-31 µm/+5 µm

  • Higher Co levels for better toughness, impact strength and ductility

  • Densified structure promotes superior coating density and powder flow

  • Useful up to 900° F / 482° C

WC-729-5  (127KB)

WC-128-2

WC-17Co

(Sintered & Crushed)

Co 16.8

C 5.2

W balance

-53 µm/+22 µm

  • Higher Co levels provide better toughness, impact strength and ductility than WC-12Co

  • Densified structure promotes superior coating density and powder flow

  • Useful up to 900°F / 482°C

WC-128-2  (38KB)

WC-559

WC-17Co

(Plasma Densified)

Co 16.8

C 5.2

W balance

-53 µm/+22 µm

  • Higher Co levels for better toughness, impact strength and ductility

  • Densified structure promotes superior coating density and powder flow

  • Useful up to 900°F / 482°C

WC-559 (126KB)

WC-724 / 1310VF

WC-10Ni

(Agglomerated & Sintered)

Ni 10.0

C 5.5

W balance

-45 µm/+11 µm

  • Better corrosion protection than WC-Co

  • Excellent low-temperature wear properties up to 900°F / 482°C

  • Superior deposition efficiency (DE)

WC-724 / 1310VF (129KB)

WC-724-1/1310VM

WC-10Ni

(Agglomerated & Sintered)

Ni 10.0

C 5.5

W balance

-53 µm/+16 µm

  • Better corrosion protection than WC-Co
  • Excellent low-temperature wear properties up to 900°F / 482°C

  • Superior deposition efficiency (DE)

WC-724-1 / 1310VM (39KB)

WC-113

WC-Co-Cr

(Sintered)

Co 10.0

Cr 4.0

C 5.3

W balance

-45 µm/+5 µm

  • Improved oxidation and corrosion protection over WC-Co and WC-Ni

  • Excellent low-temperature wear properties

  • Useful up to 900°F / 482°C

WC-113 (128B)

WC-436-1

WC-Co-Cr

(Sintered)

Co 10.0

Cr 4.0

C 5.3

W balance

-53 µm/+16 µm

  • Improved oxidation and corrosion protection over WC-Co and WC-Ni

  • Excellent low-temperature wear properties

  • Useful up to 900°F / 482°C

WC-436-1 (39KB)

WC-731 / 1350VF

WC-Co-Cr

(Agglomerated & Sintered)

Co 10.0

Cr 4.0

C 5.3

W balance

-38 µm/+11 µm

  • Similar properties as other WC-Co-Cr

  • Densified structure with fine carbide dispersion promotes finer microstructure, better DE and denser, smoother coatings

  • Excellent flowability

  • Useful up to 900°F / 482°C

WC-731 / 1350VF (129KB)

WC-731-1 / 1350VM

WC-Co-Cr

(Agglomerated & Sintered)

Co 10.0

Cr 4.0

C 5.3

W balance

-45 µm/+16 µm

  • Similar properties as other WC-Co-Cr

  • Densified structure with fine carbide dispersion promotes finer microstructure, better DE and denser, smoother coatings

  • Excellent flowability

  • Useful up to 900°F / 482°

    C

WC-731-1 / 1350VM (129KB)

WC-731-6

WC-Co-Cr

(Agglomerated & Sintered)

Co 10.0

Cr 4.0

C 5.3

W Rem

-31 µm/+5.5 µm

  • Similar properties as other WC-Co-Cr

  • Densified structure with fine carbide dispersion promotes finer microstructure, better DE and denser, smoother coatings

  • Excellent flowability

  • Useful up to 900°F / 482°C

WC-731-6 (129KB)

WC-496

WC-CrC-Ni

(Sintered & Crushed)

Cr 20.0

Ni 6.3

C 5.9

W balance

-45 µm/+16 µm

  • Superior oxidation and corrosion properties than other WC-based materials

  • Better chemical resistance than other WC-based materials

  • Useful up to 1400°F / 760°C

WC-496 (129KB)

WC-733 / 1356VM

WC-CrC-Ni

(Agglomerated & Sintered)

Cr 20.0

Ni 6.5

C 5.8

W balance

-45 µm/+16 µm

  • Similar properties as other WC- NiCr

  • Densified structure with fine carbide dispersion promotes finer microstructure, better DE and denser, smoother coatings

  • Excellent flowability

  • Useful up to 1400°F / 760°C

WC-733 / 1356VM (129KB)

WC-735-1

WC-12Co+50Ni

(Blended)

Ni 36.3

Cr 7.3

Fe 2.3

Si 2.3

B 1.6

WC-12Co balance

-53 µm/+16 µm

  • Excellent combination of abrasion resistance and toughness

  • Economical solution to severe wear applications

  • Useful up to 900°F / 482°C

WC-735-1 (135KB)