Carbide

Carbide

Ultimate wear protection

Resisting wear is one of the greatest challenges for moving components. To help fight high- and low-temperature wear, we offer a complete line of spray dried, cast and sintered carbide powder solutions. See our APT, chromium carbide and tungsten carbide powder formulas below.  

APT -


Powder Name & Composition

Chemistry & Size

Characteristics

Safety Data Sheet (SDS)

CRC-410

CrC-30NiCr

(Activated)

Ni 8.0

C 4.0

Cr balance

-53 µm/+16 µm

  •  Atomized, fully alloyed CrC-NiCr powder

  • Improved DE and stress properties over traditional blended CrC-NiCr

  • Excellent for high-temperature cavitation, abrasion and sliding wear

  • Good hot gas and corrosion resistance

  • Useful up to 1600°F / 871°C

CRC-410 (132KB)

CRC-410-1

CrC-30NiCr

(Activated)

Ni 8.0

C 4.0

Cr balance

-45 µm/+11 µm

  • Atomized, fully alloyed CrC-NiCr powder

  • Improved DE and stress properties over traditional blended CrC-NiCr

  • Excellent for high-temperature cavitation, abrasion and sliding wear

  • Good hot gas and corrosion resistance

  • Useful up to 1600°F / 871°C

CRC-410-1 (132KB)

CRC-425

CrC-40NiCr

(Activated)

Ni 21.5

C 3.4

Cr balance

-53 µm/+16 µm

  • Atomized CrC-Ni-Cr powder similar to CRC-410

  • Improved ductility and better toughness

  • Slightly lower hardness

CRC-425 (132KB)

W-121

WC-36Cr-20Co

(Activated)

Cr 34.0

Co 20.0

C 4.0

W balance

-45 µm/+16 µm

  • Atomized WC-CoCr powder

  • Excellent DE (55-65%), flow -and spray-ability

  • Candidate for hard chrome replacement

  • Good sliding wear and mating properties

W-121 (133KB)

W-121-1

WC-36Cr-20Co

(Activated)

Cr 34.0

Co 20.0

C 4.0

W balance

-53 µm/+22 µm

  • Atomized WC-CoCr powder

  • Excellent DE (55-65%), flow- and spray-ability

  • Candidate for hard chrome replacement

  • Good sliding wear and mating properties

W-121-1 (133KB)

W-124

WC-48Cr-12Co

(Activated)

Cr 48.0

Co 12.0

C 4.0

W balance

-45 µm/+16 µm

  • Atomized WC-CoCr powder

  • Designed as a superior alternative to traditional WC alloys

  • Good toughness and corrosion resistance

  • Excellent DE (55-65%), flow- and spray-ability

  • Superior wear resistant properties

  • Candidate for hard chrome replacement

W-124 (133KB)

W-129

WC-45Cr-18Ni

(Activated)

Cr 43.5

Ni 18.0

C 3.5

W balance

-45 µm/+16 µm

  •  Atomized WC NiCr powder

  • Excellent DE (55-65%), flow and spray-ability

  • Candidate for hard chrome replacement

  • Good sliding wear and mating properties

W-129 (134KB)

Chromium Carbide -

Tungsten Carbide -