Coating Slurries

Coating Slurries

A slurry for any need

Based on water or solvent, or a hybrid of both, our more than 175 coating slurries are designed to address all your corrosion, oxidation, wear, insulation and release needs.

Our proprietary materials are paint-type slurries that are typically applied by standard air atomizing spray equipment, then dried and cured. Depending on your requirements, they can also be applied by bulk processes such as dip and spin, and manual process such as dip and flowcoat. 

Our slurry families

See our proprietary slurry families below and the benefits they offer.


Slurry Family

Characteristics

SermaBond® Cements

  • Useable up to 2000°F / 1093°C

  • Good dielectric and thermal barrier properties

SermaGard® Materials

  • Can impart various combinations of corrosion, high-temperature oxidation and thermal shock, wear, abrasion and chemical resistance

  • Good lubricity, release properties and sealing properties

SermaLube® Dry Film Lubricants

  • Good lubricity and wear resistance under load conditions and high temperatures

  • Can reduce torque characteristics of fasteners

SermaSeal® Sealers

  • Deliver reduced porosity

  • Improved corrosion resistance and smoother surface finish

SermeTel® Inorganic Primers

  • Primarily aluminum metallic ceramic coatings

  • Bond tightly to metal substrates

  • Good galvanic corrosion resistance and oxidation resistance up to 1200°F / 648°C

SermeTel® Resin Coatings

  • Corrosion and erosion resistance

  • Good release properties on light metals (such as magnesium and aluminum)

  • Topcoats provide additional anti-fouling and release properties